Radon is a naturally occurring radioactive gas that forms from the decay of uranium in soil, rock, and water. It seeps into buildings through cracks and gaps in the foundation, accumulating to dangerous levels indoors. While radon is present everywhere in the environment, it becomes problematic when concentrated in enclosed spaces like homes and workplaces.
Exposure to high levels of radon over an extended period increases the risk of lung cancer. When inhaled, radon decays in the lungs, releasing radioactive particles that can damage lung tissue and lead to cancerous growths. Smokers are especially susceptible to the dangers of radon, as the combination of smoking and radon exposure significantly multiplies the risk of lung cancer.
The only way to know if your home has elevated radon levels is to test for it. Fortunately, radon testing is simple and inexpensive, with do-it-yourself kits widely available. These kits typically involve placing a detector in the lowest livable area of the home for a specified period, after which it's sent to a laboratory for analysis. Radon detectors are devices designed to measure the concentration of radon gas in the air within a home or building. They come in various types, including short-term detectors, long-term detectors, and continuous monitors. Short-term detectors are typically used for rapid assessment, while long-term detectors provide a more accurate picture of radon levels over an extended period. Continuous monitors offer real-time monitoring, providing constant updates on radon concentrations.
If test results reveal elevated radon levels in your home, don't panic. There are effective measures you can take to reduce radon concentrations and minimize health risks. Radon mitigation techniques include installing vent pipes and fans to draw radon from the soil and safely expel it outdoors. Sealing cracks in the foundation and improving ventilation can also help prevent radon from entering the living space.
Despite its status as a leading cause of lung cancer, radon often flies under the radar in public consciousness. Increasing awareness about the dangers of radon is crucial to protecting public health and saving lives. Education campaigns, outreach efforts, and government initiatives can all play a role in raising awareness and promoting radon testing and mitigation.
]]>Before delving into the detectors, it's crucial to understand what nuclear radiation is. Radiation emanates from the decay of unstable atomic nuclei, emitting particles or electromagnetic waves. These emissions include alpha particles, beta particles, gamma rays, and neutrons, each with distinct characteristics and effects on living organisms and the environment.
Nuclear radiation detectors are specialized instruments designed to identify, measure, and monitor various forms of radiation. Their primary function is to detect ionizing radiation and assess its intensity, enabling professionals in different fields to take appropriate safety measures.
Geiger-Mueller Counters: Widely used and portable, these detectors detect ionizing radiation by measuring the electrical charge produced when radiation interacts with the gas within the detector.
Scintillation Counters: These detectors utilize materials that emit light when exposed to radiation. The emitted light is then converted into electrical signals for measurement.
Ionization Chambers: Operating on the principle of collecting ionized particles, these detectors measure the electrical current produced by radiation.
Solid-State Detectors: Utilizing semiconductor materials like silicon or germanium, these detectors directly convert radiation energy into electrical signals for measurement.
Neutron Detectors: Specially designed to detect neutron radiation, these detectors often use materials that undergo nuclear reactions in the presence of neutrons, generating measurable signals.
1. Medical Imaging: In procedures like X-rays, CT scans, and PET scans, detectors help visualize internal structures and diagnose ailments.
2. Nuclear Power Plants: Continuous monitoring of radiation levels ensures the safety of workers and prevents potential environmental hazards.
3. Security and Defense: Detectors are used to prevent illicit trafficking of radioactive materials and for national security purposes.
4. Environmental Monitoring: Assessing radiation levels in the environment aids in ensuring public safety and understanding the impact of nuclear incidents.
Despite their effectiveness, nuclear radiation detectors face challenges such as sensitivity to environmental conditions and limitations in detecting certain types of radiation. Advancements in materials science, miniaturization, and data analysis techniques are underway to enhance their sensitivity, accuracy, and portability.
Nuclear radiation detectors are indispensable tools in various fields, safeguarding lives, the environment, and ensuring the safe use of radioactive materials. As technology continues to advance, the development of more sophisticated and efficient detectors will further strengthen our ability to detect and mitigate the risks associated with nuclear radiation.
]]>Quality and Durability: Genuine products are typically built to high-quality standards, ensuring longevity and reliability. They are designed to withstand the demands of a professional tattoo artist's studio.
Warranty and Support: Genuine products often come with manufacturer warranties, ensuring peace of mind in case of malfunctions or issues. Additionally, you can expect better customer support and access to replacement parts if needed.
Consistency and Precision: Genuine stencil printers are engineered to provide consistent and precise stencil transfers, which is crucial for professional tattoo work.
Compatibility: Genuine products are more likely to be compatible with popular design software and accessories used by tattoo artists.
Reputation: Using a genuine stencil printer may enhance your studio's reputation, assuring clients of your commitment to quality and professionalism.
Clone stencil printers are cheaper alternatives often produced by lesser-known manufacturers. While they might seem tempting due to their lower price point, they come with potential drawbacks:
Quality and Reliability: Clone stencil printers may be less durable and prone to malfunction. The lower quality components may result in breakdowns or inconsistent performance.
Limited Support: Finding replacement parts and getting technical support for clone products can be a challenge, leaving you on your own if issues arise.
Inaccurate Transfers: Clone machines may not offer the same level of precision and consistency, which can lead to design inaccuracies and client dissatisfaction.
Shorter Lifespan: These printers are less likely to withstand the test of time, leading to additional expenses for replacements.
1. Appearance
STOP and COPY buttons of genuine machine are made of organic glass, transparent and beautiful while buttons of fake thermal printer are made of general injection molded parts. The shell surface of genuine machine has been specially treated to make it more wear-resistant. After experimental testing, the shell of genuine machine can effectively retardant and ensure user safety while the fake one can't.
2. Main Board Layout
Genuine mahcine equiped with brand new 95430 control chip which makes transfer more smooth. Fake machine equips with old 6835 control chip which has been eliminated.
There is no battery on the main board of genuine machine, convenient for air transport, while main board of fake machine equips with battery.
Genuine printer adopt wide voltage design, compatible with both 110V and 220V, but the fake printer is not wide voltage design.
MT200 Tattoo Stencil Printer
Appearance Comparison
Main Board
Parts of fake printer are manual welding, can be easily damaged. PCB board of genuine priner adopt s connector design to avoid manual welding, more stable.
When deciding between a genuine or fake thermal tattoo stencil printer, the choice largely depends on your professional needs and budget. While fake may be a tempting option due to their affordability, it's essential to consider the long-term implications. Investing in a genuine thermal stencil printer not only ensures quality, consistency, and reliability but also conveys a commitment to professionalism and client satisfaction. It's an investment in your artistry and your reputation as a tattoo artist. Ultimately, the decision between genuine and fake comes down to your priorities, but for many professional tattoo artists, a genuine stencil printer is the right choice.
]]>To start, find a stable and level surface to place your digital ultrasonic cleaner. Ensure the power cord is properly connected to the unit and a suitable power outlet. Position the unit in an area where it is easy to access and operate.
You can use warm tab water only, but most digital ultrasonic cleaners work optimally with a cleaning solution to enhance the cleaning process. Refer to the user manual for the recommended cleaning solution or a mixture of water and a mild detergent. It's essential not to use harsh chemicals or solutions that may damage the items you intend to clean. Add the cleaning solution to the tank, following the recommended fill level most ultrasonic cleaner comes with max line mark. Avoid overfilling, as it may lead to spillage during operation.
Turn on the digital ultrasonic cleaner using the power button or switch. As the unit powers up, the digital display should illuminate, indicating that the machine is ready to use.
Many digital ultrasonic cleaners come equipped with a timer function, allowing you to set the cleaning time. Check the user manual for recommended cleaning times, as they can vary depending on the type of items being cleaned. Typically, cleaning cycles last between a few minutes to several minutes, depending on the level of soiling.
Ensure the items you wish to clean are suitable for ultrasonic cleaning. Items such as jewelry, metal objects, eyeglasses, and small tools are generally safe to clean using an ultrasonic cleaner. Place the items in the provided mesh basket or holder, as this prevents direct contact with the tank's bottom and ensures even cleaning.
Carefully lower the mesh basket with the items into the cleaning solution. Be cautious not to submerge the ultrasonic cleaner's body or immerse the items entirely if they are not waterproof.
Press the start or run button to initiate the cleaning cycle. As the digital ultrasonic cleaner springs to life, it emits high-frequency sound waves, creating a phenomenon called cavitation. These tiny bubbles implode near the surface of the items, gently scrubbing away dirt, grime, and contaminants.
Keep an eye on the cleaning process to ensure everything functions correctly. Observe how effectively the items are being cleaned. If necessary, you can adjust the cleaning time based on the level of soiling or the items' delicate nature.
Once the cleaning cycle is complete, press the power button to turn off the ultrasonic cleaner. Allow the unit to cool down before proceeding to remove the items.
Carefully remove the mesh basket or holder with the cleaned items from the cleaning solution. Rinse them thoroughly with clean water to remove any remaining cleaning solution or residue.
Finally, allow the cleaned items to air dry or use a soft, lint-free cloth to gently dry them. Take a moment to inspect the items to ensure they are clean and free from any lingering contaminants.
With the user-friendly and efficient process of a digital ultrasonic cleaner, achieving impeccable cleanliness has never been easier. From jewelry enthusiasts to watch collectors and beyond, these remarkable machines offer a powerful and convenient solution for maintaining the brilliance of your prized possessions. By following this step-by-step guide, you can harness the full potential of a digital ultrasonic cleaner and enjoy the magic of a spotless and dazzling world.
Ultrasonic vinyl record cleaner is a specialized device designed to clean vinyl records using ultrasonic technology. Unlike traditional cleaning methods that involve manual scrubbing or brushing, ultrasonic cleaners use high-frequency sound waves to remove dirt, dust, and debris from the record's grooves.
The ultrasonic vinyl record cleaner consists of a tank filled with a cleaning solution, typically a mixture of distilled water and a mild detergent. The vinyl record is placed on a spindle or holder and then lowered into the cleaning solution. Once the cleaning cycle starts, ultrasonic transducers generate high-frequency sound waves that create millions of tiny bubbles in the solution through a process called cavitation.
As these bubbles collapse and implode near the vinyl's surface, they create a scrubbing action that effectively dislodges and removes dirt particles and contaminants from the grooves of the record. The process is gentle and safe, ensuring that the delicate surface and grooves of the vinyl remain undamaged.
1.Preservation of Audio Quality
By removing dust and grime from the grooves, an ultrasonic cleaner restores the record's original sound quality. Crisp highs, full mids, and resonant lows are brought back to life, allowing the listener to experience the music as intended by the artist.
2.Gentle and Safe
Unlike mechanical cleaning methods that might inadvertently cause scratches or damage, ultrasonic cleaning is gentle on vinyl records. It ensures that the record's surface and grooves remain intact, preserving the longevity of your cherished collection.
3. Time and Labor-Efficient
Ultrasonic cleaning requires minimal manual effort. Once the record is set up in the machine, it does the job automatically, allowing you to multitask or enjoy your music collection elsewhere.
4. Versatility
While primarily designed for vinyl records, many ultrasonic cleaners can also be used to clean other small items like jewelry, eyeglasses, and even electronic components.
5. Cost-Effective
While ultrasonic cleaners may seem like a significant investment initially, they can save money in the long run by extending the life of your records, reducing the need for expensive replacements.
Like any other electronic products, ultrasonic vinyl cleaner has it own cons.
Cost: Ultrasonic vinyl record cleaners can be more expensive than traditional cleaning methods, making them a significant investment for some users.
Learning Curve: While the cleaning process itself is straightforward, some users may need to learn how to properly set up and operate the machine to achieve the best results.
Not Suitable for All Records: Ultrasonic cleaning is generally safe for vinyl records, but some collectors may prefer manual cleaning for particularly rare or delicate records to have more control over the process.
Limited Capacity: The size of the cleaning tank determines the number of records that can be cleaned simultaneously. Some machines may have a limited capacity, which could be a drawback for those with large record collections.
Cleaning Solution Dependency: Ultrasonic cleaners typically require a cleaning solution to be effective. Users need to ensure they have an appropriate cleaning solution on hand for regular use.
Potential Noise: Ultrasonic cleaners generate high-frequency sound waves, which can create noise during the cleaning process. While not excessively loud, it might be a consideration for users in noise-sensitive environments.
While ultrasonic vinyl record cleaners are generally more expensive than traditional cleaning methods, they are favored by audiophiles and collectors who value the best possible sound quality and preservation of their vinyl collections. They offer an effective and convenient solution for keeping vinyl records in pristine condition and ensuring an enhanced listening experience for years to come.
]]>
An ultrasonic jewelry cleaner is a powerful cleaning device that uses ultrasound waves to remove dirt, oils, and other contaminants from jewelry items. It consists of a tank filled with a cleaning solution and an ultrasonic transducer that generates high-frequency sound waves. When the waves propagate through the solution, they create tiny bubbles that implode, producing a scrubbing action called cavitation. This cavitation process gently but effectively cleans every nook and cranny of your jewelry, including gemstones, chains, and intricate designs.
1.Thorough Cleaning
Traditional cleaning methods such as brushing or soaking in cleaning solutions may not effectively reach all the hidden crevices of your jewelry. Ultrasonic cleaners, on the other hand, can remove dirt from even the tiniest of spaces, ensuring a more thorough cleaning.
2. Time and Effort Saving
Cleaning jewelry by hand can be a tedious and time-consuming task. With an ultrasonic jewelry cleaner, you can eliminate the need for scrubbing and soaking, saving you precious time and effort. Simply place your jewelry in the tank, press a button, and let the cleaner work its magic.
3. Versatility
Ultrasonic jewelry cleaners are not limited to cleaning just jewelry. They can also be used to clean other small items like eyeglasses, watches, dentures, coins, and even delicate collectibles. This versatility makes them a valuable addition to any household.
4. Gentle on Jewelry
Despite their powerful cleaning action, ultrasonic jewelry cleaners are gentle on your precious pieces. The process is non-abrasive and does not damage delicate gemstones or weaken jewelry settings. It effectively removes dirt without causing any harm, ensuring that your jewelry retains its beauty for years to come.
First, read the instruction before using.
Different models of ultrasonic cleaners may have specific guidelines and cleaning solutions to use. Always read the user manual carefully before using the device to ensure optimal results.
Second, Avoid sensitive gemstones.
While most gemstones can be safely cleaned in an ultrasonic cleaner, some sensitive stones like opals, pearls, and emeralds may be at risk of damage. Check with a jeweler or refer to the gemstone-specific care instructions before using the cleaner.
Final, regular maintenance.
To keep your ultrasonic jewelry cleaner in top condition, clean the tank regularly according to the manufacturer's instructions.
CDS-400B digital ultrasonic cleaner comes with rotatable lid, 500mL beaker and cross which is special design for jewelry. 35kHz with 55W power of ultrasonic waves output for a powerful yet gentle clean and won't damage your valuables. It is suitale for glasses, brooch, denture, toothbrush, false teeth and more!
Enjoy!
]]>
Formaldehyde exists in different forms that vary in their properties, which affects how they are used and their potential health effects. Some of the common forms of formaldehyde are:
-Gas: Formaldehyde as a gas is commonly used in medical settings as a disinfectant or preservative.
-Liquid: Formaldehyde in liquid form is used in industrial settings for purposes such as embalming, paper manufacturing, and as a binder in wood products.
-Solid: Formaldehyde in solid form is used in melamine-formaldehyde resins found in decorative laminates, countertops, and dishware
Formaldehyde is a known human carcinogen, meaning it has the potential to cause cancer in humans. When exposed to formaldehyde, people can experience a range of symptoms such as irritation of the eyes, nose, lung, and throat, coughing, and respiratory distress. Skin rashes, headaches, and nausea are also common symptoms of formaldehyde exposure.
-Ventilation: Proper ventilation can help reduce exposure to formaldehyde. Open windows or use exhaust fans to improve air circulation.
1. Using Formaldehyde-Free Products
Choose products labeled as "formaldehyde-free," like wood products, personal care products such as shampoos, and nail polish.
2. Personal Protective Equipment
Wearing protective equipment like gloves, goggles, and respirators can help reduce exposure to formaldehyde in the workplace.
3. Regulation
Governments can monitor and regulate the use of formaldehyde in consumer products and industrial settings to minimize the risk of exposure, especially for workers in these industries.
4. Formaldehyde Detecting
Choosing the right formaldehyde detector can help ensure that you and your loved ones or colleagues are safe from the hazards of formaldehyde exposure.
Accuracy: The detector should have a high level of accuracy and sensitivity, so that it can reliably detect formaldehyde levels in the air.
Range: The detector range should cover the levels of formaldehyde that are relevant to your environment. For example, industrial settings may require a detector with a higher range than residential settings.
Power Source: Consider the power source of the detector, as well as the battery life or power consumption for continuous monitoring.
Calibration: Some detectors require calibration before use, which can impact on ease of use.
Cost: Consider the cost of the detector, including any additional features like software or data logging.
LifeBasis 8 in 1 Formaldehyde Detector, can tests 8 kinds data in same time, detection range 0 ~ 1.999mg/m³, real-time testing records and analysis with sound and color alarm, keep your family safer.
Enjoy!
]]>Thermal tattoo stencil paper is a specialized type of paper that is used to transfer tattoo designs onto the skin. It is made with a special coating that reacts to heat, allowing the design to be transferred from the paper to the skin. This type of paper is commonly used in tattoo studios around the world because it provides a clean, accurate, and efficient way to transfer designs.
Using thermal tattoo stencil paper provides several benefits for tattoo artists. Firstly, it allows for the accurate transfer of complex designs onto the skin. This means that even the most intricate designs can be transferred with precision, ensuring that the tattoo is of the highest quality.
Secondly, thermal tattoo stencil paper allows for faster tattooing. The stencil can be applied quickly and easily, allowing the artist to focus on the tattooing process rather than spending time drawing the design onto the skin.
Finally, thermal tattoo stencil paper is a more hygienic option than traditional transfer methods. The paper is disposable, meaning that it can be used once and then discarded, reducing the risk of cross-contamination between clients.
Using thermal tattoo stencil paper is a simple process that can be completed in just a few steps. Here's how it works:
Choose a high-quality thermal tattoo stencil paper that is the right size for your design.
Print or draw the design onto the paper using a thermal printer or carbon-based ink.
Place the paper face-down onto the skin in the desired location.
Apply heat to the paper using a thermal transfer machine or handheld heat source.
Thermal tattoo stencil paper is an essential tool for tattoo artists around the world. It provides a precise and efficient way to transfer tattoo designs onto the skin, ensuring that every tattoo is of the highest quality. Using thermal tattoo stencil paper can save time, provide accuracy, and ensure a hygienic transfer process. If you're a tattoo artist looking to improve your craft, investing in thermal tattoo stencil paper is a must.
]]>
After getting a tattoo, it is important to keep it clean and free of bacteria to prevent infection. Gently wash your tattoo with lukewarm water and a mild, fragrance-free soap. Avoid using hot water or scrubbing the tattoo, as this can damage the skin and the tattoo itself. Pat dry the area with a clean, dry towel.
After cleaning your tattoo, apply a thin layer of fragrance-free lotion or ointment to keep the skin moisturized. A good moisturizer will help prevent the tattoo from drying out, cracking, and peeling. Be sure to use a lotion or ointment that is specifically designed for tattoos, as regular lotions may contain fragrances or other ingredients that can irritate the skin.
Sun exposure can fade and damage tattoos, so it is important to avoid direct sunlight for the first few weeks after getting a tattoo. If you need to be outside, cover the tattoo with loose clothing or a bandage. After the tattoo has healed, be sure to apply sunscreen to the area whenever you are in the sun.
It is normal for a tattoo to itch as it heals, but resist the urge to scratch or pick at the tattoo. This can damage the skin and the tattoo, and increase the risk of infection. If the itching is severe, you can gently pat the area with a clean, damp cloth to help alleviate the discomfort.
For the first few weeks after getting a tattoo, avoid swimming, soaking in a bathtub or hot tub, or exposing the tattoo to any other type of water. Water can soften the skin, making it more susceptible to damage and infection. When you do shower, avoid letting the water hit the tattoo directly.
In conclusion, taking proper care of your tattoo after it is done is crucial for ensuring that it looks great and lasts for years to come. Follow these essential tips for tattoo aftercare, and don't hesitate to consult with your tattoo artist or a healthcare professional if you have any concerns or questions about the healing process.
Formaldehyde is a naturally occurring gas that is also produced in small quantities by the human body. It is widely used in industrial applications, such as the production of plastics, resins, and textiles, as well as in consumer products like furniture and cleaning agents. Formaldehyde is also present in cigarette smoke and some types of wood smoke.
Exposure to formaldehyde can have both short-term and long-term health effects. Short-term exposure can cause eye, nose, and throat irritation, coughing, and wheezing. Long-term exposure can lead to cancer and other serious health problems, including respiratory issues and neurological disorders.
Formaldehyde exposure is particularly dangerous for children, pregnant women, and individuals with pre-existing respiratory conditions, such as asthma or COPD. Additionally, prolonged exposure to formaldehyde can cause a condition called "sick building syndrome," which can cause fatigue, headaches, and other symptoms.
A formaldehyde detector is an essential tool for ensuring that your home or workplace is safe and healthy. By monitoring the levels of formaldehyde in your environment, you can identify any potential health risks and take steps to mitigate them.
Having a formaldehyde detector can also provide peace of mind, especially if you live in an area with high levels of pollution or work in an industry that involves frequent exposure to formaldehyde. Additionally, a formaldehyde detector can help you identify potential sources of formaldehyde in your home or workplace, allowing you to take steps to reduce your exposure.
When choosing a formaldehyde detector, there are several factors to consider. First, you'll want to look for a detector that is sensitive enough to detect even low levels of formaldehyde. Additionally, you'll want to choose a detector that is easy to use and provides accurate, reliable readings. Other features to consider include the size of the detector, the type of display (digital or analog), and whether the detector can be calibrated or needs to be replaced after a certain amount of time.
LifeBasis formaldehyde detector, is a multifunctional air quality monitor which can test 8 kinds data including formaldehyde, volatile organic compound, particle matter, air quality index, temperature and humidity at the same time. with advanced and accurate sensor, this formaldehyde detector can do real-time testing record and analyzed, and alert when air quality index exceeds the standard level. Detection Range: PM2.5/PM1.0/PM10: 0 ~ 999ug/ m³, TVOC: 0.000 ~ 9.999mg/m³, 0 ~ 1.999mg/m³.
LifeBasis WIFI formaldehyde detector can connect to phone or PC via WIFI, you can check the real-time air quality on the mobile phone at any time, with DART new generation anti-interference formaldehyde sensor, it can accurately detect HCHO, TVOC, humidity and temperature.
Measuring Temperature: -10℃-40℃, measuring Humidity: 20%-80%, HCHO: 0-1.999 mg/m3, TVOC: 0-9.999 mg/m3
Enjoy!
Deep Cleaning
Digital ultrasonic cleaners are incredibly effective in removing dirt, grime, and other contaminants from a variety of surfaces. The ultrasonic waves penetrate deep into the surface of the object being cleaned, dislodging even the most stubborn dirt and grime. This makes them ideal for cleaning delicate and hard-to-reach items such as jewelry, watches, dental and medical equipment, electronic parts, and more.
Quick Cleaning
Ultrasonic cleaners are very efficient and can clean items in a fraction of the time it would take to clean them manually. Depending on the size of the item being cleaned, it may only take a few minutes for an ultrasonic cleaner to thoroughly clean it.
Safe for Delicate Items
Ultrasonic cleaning is a gentle and non-invasive cleaning method that is safe for delicate items. Unlike other cleaning methods that may scratch, damage, or corrode delicate items, ultrasonic cleaners use a solution that is gentle and non-abrasive, making them ideal for cleaning fragile items like jewelry, eyeglasses, and other delicate items.
Eco-Friendly
Ultrasonic cleaners use water-based cleaning solutions that are free from harmful chemicals, making them eco-friendly. Unlike other cleaning methods that may use toxic chemicals that can harm the environment, ultrasonic cleaners are environmentally safe and do not release any harmful substances into the environment.
Initial Cost
Some professional digital ultrasonic cleaners can be expensive, and the cost can be a significant investment for small businesses or individuals. The price of an ultrasonic cleaner can range from a few hundred dollars to several thousand dollars, depending on the size, features, and brand.
Limited Size
Ultrasonic cleaners come in various sizes, but they have a limit to the size of the item that can be cleaned. Larger items may not fit in the cleaning tank, which may require multiple cleaning cycles to clean the item thoroughly.
Improper use May Damage Some Items
Ultrasonic cleaning can cause damage to some items. The high-frequency sound waves can cause vibrations that may dislodge stones, loosen or damage solder, or even cause the item to crack. Therefore, it is essential to use caution when cleaning items with an ultrasonic cleaner.
In conclusion, digital ultrasonic cleaners are incredibly effective in cleaning delicate and hard-to-reach items. They are quick, efficient, safe, and eco-friendly, making them a popular cleaning method for various industries and households. However, they have their cons, including the initial cost, limited size, potential damage to some items, and regular maintenance requirements. Therefore, before investing in an ultrasonic cleaner, it is essential to weigh the pros and cons to determine if it is the best cleaning method for your needs.
Enjoy!
]]>
Q: Can ultrasonic cleaner remove rust or tarnish?
A: No. ultrasonic clean can only act on the surface of the item, if you want remove the rust or tarnish, the rust remover needed, items to be cleaned need to be soaked in the rust remover, and the use ultrasonc cleaner to cleaner them.
Q: What frequency should i choose?
A: The higher the power density of the ultrasonic wave, the stronger the cavitation effect, the faster the speed, and the better the cleaning effect. You need to choose the suitable frequency depends material, size, shape, surface treatment and other factors of the cleaned items.
Optical glass and liquid crystal products, the ultrasonic power is 10~20W/L
Precision instrument components, the ultrasonic power is 20~25W/L;
Metal internal pressure parts, the ultrasonic power is 25~30W/L;
Powder metallurgy parts and precision castings, the ultrasonic power is 30~35W/L;
Q: How long is the proper cleaning time?
A: in fact, there is no exact cleaning time, depending on the ultrasonic power, ultrasonic frequency, cleaning solution and item material, cleaning time is different. Ultrasonic power is stronger, the cleaning time can be cleaned with less time.
It usually takes 3-5 minutes for small items like glasses, necklaces, bracelets, gold and platinum jewelry, jewelry etc. For large items with heavy dirt, need around 15-30 minutes.
Q: What cleaning solution should i use?
A: To clean the airbrush gun, use boric acid.
To clean bullets, use citric acid.
To clean gold and copper products, use oxalic acid, citric acid.
To clean silver products , use silver washing liquid.
To clean normal watch band, glasses, jewelry, use detergent.
Q: can ultrasonic cleaner clean tableware?
A: Yes!
Q: Why the vibration of the ultrasonic cleaning machine is small?
A: 1. transducer is aging becasue of long time using, and the performance is attenuated
2. The frequency point of the ultrasonic generator and the transducer deviates
3.Part of the transducer is damaged.
4.The working environment of the cleaning machine, such as the type of cleaning agent, cleaning temperature, liquid level, etc
5.Placement of objects to be cleaned, replacement of cleaning solution, etc.
LifeBasis professional digital ultrasonic cleaners: LifeBasis Ultrasonic Jewelry Cleaner
Updating...
]]>
Working principle of ultrasonic cleaning machine : ultrasonic cleaner can generate high-frequency waves in a liquid, items to be cleaned are placed in this liquid, where the rapid motion of the water creates very small bubbles that hit the surface to be cleaned and knock any dirt to the bottom of the liquid's container.
Jewelry
Ultrasonic jewelry cleaner is suitable for diamonds, platinum, and gold jewelry but not for Gemstones such as emeralds, rubies, emeralds, opals, malachite, etc.; organic gemstones such as pearls, corals, and emeralds. Ultrasonic cleaner will damage jewelry structure especailly jade with cracks inside.
Other Items
Chemicals, corrosive items.
Electronic equipment, such as TVs, computers, mobile phones, etc., are prone to damage circuits;
Soft metals such as pure gold and pure silver are easy to deform
Items with coatings, such as layers of articles with paint, spray paint, like glasses or sunglasses with little broken coating.
To avoid damage, even items can be clean by ultrasonic cleaner , need to fchoose suitable ultrasonic frequency, cleaning solution, cleaning time depending on the material, size, shape, surface treatment and other factors of the cleaned items.
Enjoy!
]]>
If you have CDs or DVDs that are not put back in the proper case, then becasue they are left outside the case, sticky, little fingerprints wind up all over them making them stick to other DVDs and unable to play in the DVD player, the LifeBasis CD-7920 digital ultrasonic cleaner(850ML tanks) is the best solution to clean CDs easily. It may not prevent the dirt but it will take it away!
pull out all of DVDs that need cleaning to place in the ultrasonic cleaner, set the timer, in a matter of just eight minutes, the dirty residue left on DVDs is removed without creating any scratches or use of liquid cleaners, just plain (warm) tap water inside the cleaner.
retrieve the clean DVDs from the ultrasonic cleaner, just pat dry them with a soft cloth.
1. Jewelry
necklaces, bracelets, rings, earrings etc.
2. Glasses and watches
glasses, sunglasses, waterproof watches, watch band
3. Hygiene items
combs, electric shaver heads, toothbrushes, dentures, razor blades
4. Stationary
pen-heads, printer heads, seals, rubber stamps
5. Silver items
that have dirt accumulation
6. Other items
tools, watches parts, coins, keychains, valves, machine nozzles, badges, metal disware, instruments, filters, kitchen untensils, makeupbrush, makeup kit and more.
Ultrasonic cleaners for small items check here: LifeBasis Ultrasonic Jewelry Cleaner
]]>
1
Q: Can i use flammable solvents with your machine
A: We do not recommend that you use flammable solvents as cleaning agents.
When the ultrasonic cleaner is working, a certain amount of heat is generated. We don’t know what the ignition point of the flammable solvent you mentioned is, but this may be dangerous. For your safety considerations, It is best not to use flammable solvents.
2.
Q: Can i put your items directly in the tank and not in/on the basket?
A: Yes, you can put the item directly in the tank. But it is recommended to use the attached basket when cleaning jewelry. The basket will reduce the working effect of ultrasound, but it will also protect the jewelry.
3.
Q:Has anyone tied making liposomal vitamins with this puppy?
A: This ultrasonic cleaner is not intended to make liposomal vitamins.
4.
Q: Do i need any kind of cleaner with this machine?
A:you can directly use tap water, but when you clean the dirtier stuff, adding a cleaning solution will get a better cleaning effect. For example, when cleaning gold and copper products, use oxalic acid and citric acid. To clean silver products, use silver washing water, etc.
5.
Q: Is it safe to clean an apple watch?
A: I cleaned a couple printer heads with it but I don't think I would trust any sonic cleaner with a smart watch. If anything is slightly loose or there are tiny wires attaching components together there is a good possibility of knocking it loose, that is what it is designed to do
6.
Can this be used on partial dentures that have wires?
A: The machine can be use to clean the partial dentures that have metal wires. The cleaning steps as following, which will get better cleaning effect:
1. Add warm water, one tablet and dentures into ultrasonic cleaner.
2. Waiting for the tablet to dissolve, turn on the machine for cleaning.
3. After clean, rinse the dentures under running water. Dry dentures thoroughly before wearing.
Note: Dentures with stubborn stains, please clean several times to get a better results.
7.
Q: Can this product be used to clean pocket knives?
A: Yes, it can be used to clean pocket knives.
8.
Q: what's the difference from the silver one by the same maker?
A:the silver ultrasonic cleaner is 750 ml and has 3 different cleaning cycles (1.5/3/5 minutes).
The white sonic Jewellery cleaner is 600ml with 5 digital timer (90s-180s-300s-480s-600s).
9.
Q: Can I use this to clean and disinfectant nail tools?
A: Yes, you can use this ultrasonic cleaner to clean your nail tools, but it can only play a cleaning role, it has no disinfectant effect.
10.
Q: Can i use on 110 volts
A:The voltage range of Life Basis ultrasonic cleaner is 100V-120V. So, you can use on 110V.
11.
Q: Can it clean eye glasses with anti reflective coating?
A:That is exactly what I use it for. However, the soap that you would use is what's important. Using water will work fine and be safe. However, if you want to get an even deeper clean, a soap would be best. I use one that is safe for glasses, watches and just about anything else you want to clean.
12.
Q:How does it clean gold jewelry...?
A: For gold jewelry, we suggest add jewelry cleaning agents and warm water (temperature of 40°C~50°C) to clean.
If your gold jewellery has stubborn stains or does not clean well, you can soak it in water for a while before cleaning, then clean it several times.
...
keep updating.
]]>
Snoring occurs when the soft tissues of the upper airways partially obstruct the flow of air during sleep.
“Snoring occurs when your airway or throat relaxes while sleeping,” says Dr. Carlos M. Nunez, chief medical officer for ResMed. “[That causes] it to partially or fully collapse on itself, blocking the airway and causing the tissues in your airway to vibrate and make the unpleasant snoring sound we’re all familiar with.”
Many people spent hundreds of pounds on medication, and also countless times at ENT clinic.But nothing work.
Let's check anti snoring and rhinitis treatment device now .
It is painless, non-drug, non-invasive treatment device without side effects and achieve good and fast effects.
1. 2 in 1 Nasal Allergy Relief Device.
(1) laser treatment - red light therapy for relieving rhinitis and allergic symptoms (2) pulse treatment - pulse massage to stimulate the nose, relieve snoring.
2. Safe and Efficient
3 setting time and 3 intensity levels can be adjusted for this sniffing therapy device, choose the appropriate therapy time and intensity according to the condition of your body.
3. Intelligent Control
3 setting time and 3 intensity levels can be adjusted for this sniffing therapy device, choose the appropriate therapy time and intensity according to the condition of your body.
4. Wide Application
Perfect for rhinitis, allergy symptoms, relief of hay fever, snoring, congested nose, nose itching, sneezing, runny nose, nasal polyps and other nasal problems
5. Portable and Comfortable
With a stylish and compact design, the IR rhinitis therapy device can be worn for everyday use - always ready for allergies and other emergencies
1. Innovative and effective treatment to relieve symptoms of allergic rhinitis.
2. Free from side effects, can be used to prevent infection of the nose.
3. No need to take medication, cost-effective and suitable for long-term use.
4. 1-3 treatments per day, and last 4 minutes each time.
5. Requires AAA batteries x 3 (not included).
Enjoy!
]]>"Wow... Works great
No issues whatsoever.. printed multiple stencils already and still going strong.." from Jesse.
"Please help
Yes this item is wonderful. I never did think I would have it stolen from my home is there a physical identification number I can verify it belongs to me"
lol..., sorry to hear that from Savannah
Michael:
“Love it
Helps to get tattoos done easier and faster”
Abdul-Qasim
"Awesome
This is awesome and helps out so much and shortens the time tremendously"
Aaron S.
"This thing works really well, use quality stencil paper though
Make sure you don't get cheap transfer paper though. Spend they money and get good transfer paper. I tried cheap kind and it was a weak transfer. Got the good kind and it was fantastic. Great machine buy with confidence."
The tattoo guy:
"MT200 stencil machine is a buget friendly machine compared to the thousand dollars that i had to spend on my machine. Price tag of this one is definitely an attractive trait. But the machine does feel cheaply made with an all plastic body, and the direction that comes with the machine i had to read them multiple times trying to figure out how to operate the machine, it is so vague and confusing."
"it did a good job of making exact lines. if you are traveling to a convention, this machine is light and compact, so you just throw it in your bag and travel with it"
MT200 tattoo machine operation video :
https://youtu.be/U5Iz8cBlJkI?list=TLGGklGUdNiIEMkwOTEyMjAyMg
Jahzeiah :
"Good for a cheap thermal printer
I like how it’s inexpensive and it seems to be working good so all in all it’s a good product, just wish the instructions had more detail in it but that’s just my opinion.”
Victoria:
“Works like a charm<br />This thing works with ease! I’ve never used one before today and I can say it’s super easy to use!”
Emery:
“Output is just what's needed! A nice addition to my shop's equipment inventory.”
Highcountry:
“Printer is great, so much easer than tracing. But the paper has to work with machine other wise it just doesn’t print correctly.”
Keris:
“Doesnt take up much room at all, portable and lightweight. Even comes with tattoo printing paper. The instructions are simple, one page, easy to figure out. If you travel, this is easy to take along with you. The power cord is removable. This even has a button for mirror image to make this that much easier. Prints very well showing every line. Very pleased and will get a lot of use out of this.”
Leo
"It works just as its supposed to and makes it so much easier and saves a bunch of time on tattoos that can be printed after drawn."
....
More reviews are coming soon...
Enjoy!
]]>
1. Make sure what pattern you need, and tattoo type stlye and position
2. Prepare the pattern which is as complete and clear as possible or you can consult your tattoo artist before tattooing
3. Drink lots of water.
It’s important to stay hydrated during the process and you should drink plenty of water beforehand. Being well hydrated is always a good idea but in this particular case, it helps you last longer and heal quicker afterwards.
4. Sleep well night before, keep spirit high and keep strength.
Being well rested will make you less twitchy and you’ll end up with cleaner (and straighter!) lines.
5.Don't drink before tattooing
6. Eat well, avoid fasting.
Your body is going to need the energy, especially when your instinct is going to be to tense up during the painful parts of the tattoo.
7. Make sure there is no wound on the position to be tattooed.
8. Wear right clothes, loose and convenien clothing if the frist choice. It may not necessarily happen but ink from the stencil can definitely end up on your T shirt, wearing new cloth with light color is inadvisable.
9. Take something to distract yourself. Bring your phone and charger loaded up with something to watch during tattoo process.
Enjoy!
]]>
Follow below steps to finish your first try.
1. Plug the power cord into an available power outlet. When the machine is in standby, you will hear a "doo" sound. All parameter items can be set when the machine is in standby.
2. Place transfer paper and pattern paper.
Remove the protective sheet (the one between white and blue paper), and then tear off the yellow backing sheet. keep the white paper on top and blue paper down, pull them through the input and close the cover.
3. Place the transfer pattern document (need to keep it face down) and then press "COPY" button one the operation panel.
4. To make sure you get the best result, pay attention to the difference between mirror and photo model (just direction difference). Set the required parameters before transfer.
Deepness 1: The key is to set the copied documents by Deepness 1. suitable for printing patterns with lighter lines effect. When Deepness 1 works, Deepness 2 goes off.
Deepness 2: The key is to set the copied documents by Deepness 2, deepness II is for printing patterns with darker lines effect. When Deepness 2 works, Deepness 1 goes off.
5.If you want to stop the copy task, press the "Stop" button.
Thermal tattoo stencil printer operation video:
LifeBasis Thermal Tattoo Stencil Printer User Manual Link
1.tattoo transfer machine prints random line or black lines
Solution: reset the transfer machine to default setting & clean roller regularly.
how to reset it to default setting?
a) Press the "stop" button for 3 seconds, then you will hear a beep;
b) Press the "mirror" button;
c) Press the "copy" button.
2. Transfer paper get stuck.
Solution: paper get stuck when the machine is overheating, please wait for the machine to cool down, and then you can use it again.
3. The tattoo transfer paper get jammed during printing.
Pls don't remove the yellow backing paper when printing. See below picuture. No. 4 yellow paper sheet.
4..How to solve tattoo machine wrinkles up the transfer paper?
1)Please let the machine rest for a few seconds after 1-2 sheets transfer, because overheat temperature will melt the transfer paper.
2)Besides, the quality of the transfer papers will also lead to this problem, we kindly recommend trying other transfer papers.
5. Printing is incomplete.
defective image:
Reason: 1) the pattern to be printed comes with a large area of shadow , the tranfer paper got jammed. 2) the tranfer paper is not placed correctly.
Solution: Replace the stencil transfer paper. keep the yellow paper on top.
6.Tattoo stencils come out very light.
Solution: Turn on printer and let it warm up before running throug stencil!
Keep updating...
Enjoy!
]]>
Carbon dioxide (CO2) is a naturally occurring compound consisting of one carbon atom and two oxygen atoms joined by a covalent double bond.
Carbon dioxide is the most important long-lasting greenhouse gas in the Earth's atmosphere and a key element of the carbon cycle.
Natural sources of carbon dioxide emissions include decomposition, ocean release, and respiration
The biggest element of indoor air pollution is not the formaldehyde that everyone is afraid of, nor is it PM2.5. Most people understand the impact of formaldehyde and PM2.5 on the body, but ignore the harm of carbon dioxide. When this gas reaches a certain level, it will seriously endanger our health, and no purifier can effectively filter carbon dioxide.
When carbon dioxide concentration in the air is normal, it is harmless to human body, but it will affect people's respiratory system when it exceeding a certain level, because when carbon dioxide concentration in the blood increases, the acidity increases, and acidosis occurs.
1. 1000PPM
When the concentration of carbon dioxide reaches 1% (1000 PPM), people will feel dull, start to lose concentration, and have heart palpitations.
If carbon dioxide reaches 1000 PPM in an airtight bedroom, and we sleep 8 hours continuously, when we wake up in the morning, we will not feel well rested and will not want to get up.
If CO2 concentration in the air in the office reaches 1000PPM, the work efficiency of employees will decrease.
2. 1500-2000 PPM
When carbon dioxide levels reach 1500-2000 PPM, people experience wheezing, headaches, and dizziness. When two people sleep in a closed bedroom for one night, the concentration of carbon dioxide can easily reach 2000 PPM.
When the concentration of CO2 in the air in the office reaches 2000 PPM, the employees will feel sleepy, unable to concentrate, and mentally fatigued.
3. 5000PPM
When CO2 concentration is above 5000PPM, the function of the human body is seriously confused, causing people to lose consciousness and become unconscious.
LifeBasis 2022 upgraded version mini CO2 tester with high precision NDIR technology sensor can accurately track air quality. This CO2 tester equips with LCD screen and warning alarm, real-time monitor air quality to protect you and your family's health.
Easy to operate, one key control for easy operation. Long press the power key to switch on/off.
Wide application, can be used at schools, office, home, factories, hotels, grow tents, hospitals and anywhere high levels of carbon dioxide are emitted.
this CO2 detector comes with high precision laser particle sensor and NDIR (infrared) technology, accurately monitor CO2, temperature and humidity at the same time. CO2 range: 0~5000 PPM, Detection temperature: -10°C to 40°C (14°F to 104°F), Relative humidity: 20% - 80% (± 5%) RH.
1. Grow house plant
2. Open windows for ventilation
3. In the case of not opening the window, only the fresh air fan can effectively solve the problem of indoor carbon dioxide.
The fresh air fan can absorb fresh air from the outdoors and filter pollutants, provide it indoors after adjusting the temperature, and then discharge the indoor polluted air by means of extrusion, which can ensure that there is sufficient oxygen in the room and solve the problem of indoor air pollution at the same time.
Enjoy!
Radon is a colorless, odorless, radioactive gas which is slightly heavier than air. It comes from the radioactive elements uranium and radium in the earth's soil. It enters home through various cracks and pipes in the basement. If the radon gas cannot be discharged outside the house in time, then people will live in the radon gas environment for a long time. The harmful gas can cause minor symptoms like ongoing headaches or could even have a lethal effect, due to its cancer-causing properties.
Radon gas is the biggest cause of lung cancer in non-smokers, and it can triple the risk of lung cancer in smokers. About 3,200 Canadians die each year from radon-related diseases, which is far higher than other accidents (such as the chance of dying in a car accident).
Distribution of radon gas is uneven, it is difficult to tell. We can know the radon level in the house after testing.
since lab test requires lab fee, postage and a lot of waiting, and the radon gas test kit is one-time test kit which is impractical for long-term testing, the smart radon detecotr is our first choice.
LifeBasis radon detector is continuous radon test kits which use battery and is completely independent from outlet, very portable, can be placed in any location you want to test.
This smart radon tester equips with large LED screen, comes with long term and short term readings to identify temporary fluctuations.
Fast and accurate reading.
1. Increase indoor ventilation. This is the easiest way to reduce radon. Open the doors and windows of the room to form convection or turn on the exhaust fan for ventilation.
2. Seal all the large and small gaps on the walls, including the gaps in the pipes and the cracks and small holes in the ground.
3. Install air filters in indoor, because most radon progeny will be adsorbed on particles in the air.
4. A special air sluice must be installed at the drain to prevent radon, mildew, insects and harmful gases in the pipes from entering the room.
5. If the wall is made of hollow bricks, it must be treated at the junction of the floor, Block the cavity and then seal it with two inches of cement or lime to block radon gas
6. The most effective radon reduction method is an active decompression system under the floor cement slab, and it is also the most used radon reduction method by professionals.
Enjoy & keep healthy!
]]>An ultrasonic cleaners can reach cavities and crevices that are difficult to clean by brush, you can get more effective cleaning effect.
Before cleaning items, we should note about the item material, water tempreture, cleaning solution etc.To clean different items effectively:
Items Can Be Washed
1.Coins, old coins, pennies etc.
2. Personal Items including eyeglasses, sunglasses watches,dentures, razors,tableware etc,
3. Jewerly, rings, necklace, earing,bracelets, silver jewelery etc.
Note: pls don't put hardest substance (diamond), color diamond, pearls, shell cameos, amber, tortoiseshell, ivory, and corals, gemstones that have undergone heat treatment, Custom jewelry etc. in the ultrasonic jewelry cleaner.
4. CDs, DVDs, e-cigarette, vape tank
5. Baby products, feeding bottle, toys, LEGOs, Game Disc etc.
6. Precision parts
7. Makeup tools
Enjoys!
LifeBsis, make life easier!
]]>
LifeBasis Ultrasonic Jewelry Cleaner vs. Others
Step 1
Put on latex gloves and disassemble the tattoo gun. You will be removing the tip, grips and the ink tube from the tattoo gun.
Step 2
Put the tips and the tube in warm water mixed with bleach. Spray down the grips with disinfectant spray, and then place them in the water as well.
Step 3
Take the tube, grips and tip out of the warm water. The needle is thrown away in a medical waste sharps container. The other parts are wiped down and put inside the ultrasonic cleaner's cleaning basket. This cleaning process shakes residue off of the tattoo gun parts.
After each tattooing operation, the tubes and needle bars shall be placed in an ultrasonic cleaner to remove any foreign material. A high quality detergent material which shall be changed daily and is suitable for an ultrasonic cleaner is to be used.
Step 4
Place the tattoo gun tube, grips and tips each into a separate sterilization bag. These bags are chemically treated so that when the contents have been properly heated, a strip on the back of the bag changes from pink to gray. Seal the sterilization bags, and place the tools each in a separate autoclave tray.
Step 5
Fill the autoclave halfway with water, and then put in the trays with the sealed bags. If you have only one tray, then autoclave each tool separately. An autoclave works like a pressure cooker.
Enjoy!
]]>
Some chemical dips can be used to remove the tarnish but can actually damage the silver surface. while ultrasonic cleaner can remove silver tarnish quickly and safely.
Ultrasonic cleaning is accomplished by a process called ultrasonic cavitation in an ultrasonic cleaning solution. Cavitation is created when generator-powered ultrasonic transducers create billions of minute bubbles that implode and carry away contaminants when they contact the surface of pieces being cleaned. The bubbles reach into intricate pattern crevices to safely remove tarnish virtually impossible to access with a brush or polishing cloth.
1. Add cleaning solution will get a better cleaning effect when use ultrasonic cleaner.
clean silver products , use silver washing liquid. sodium-free club soda, dish soap(free of dyes, perfumes, and moisturizers),warm water and a hint of gentle soap, baby shampoo are recommanded.
2. Water Temperature-Mostly used at a temperature of about 50–65 °C (122–149 °F), however, in medical applications it is generally accepted that cleaning should be at temperatures below 45 °C (113 °F) to prevent protein coagulation.
3. Time – Depending on how dirty the items are, the time is usually from 1 to 20 minutes. After the cleaning is done, leave your items inside for another 5-10 minutes so that the dirt particles that were knocked off your pieces by the sound waves can fall to the bottom of the tank.
4. Use the basket to hold the silver items so pieces do not come in contact with each other.
How To Choose Ultrasonic Jewelry Cleaner ?
1. Keep it in a dry environment. Remember to take off silver jewelry when bathing or swimming.
2. Avoid friction and abrasion when wearing silver jewelry. Do not mix silver items with other jewelry. silver itself is very soft material, can be scratched or deformed easily. It is very difficult to fully return to its original shape after deformation
3. wipe the stains and water stains on the surface of silver items by special silver cleaning cloth and place them into jewelry box to keep them dry.
4. Aovid to use silver washing liquid continually during silver daily maintenance becasue silver washing liquid is a kind of chemical solvent which can turn silver itme to yellow.
5. The best silver jewelry maintenance method is to keep wearing them, becasue grease generated by human boday can moisturize the silverware and keeep them bright.
Enjoy!
]]>
Maybe getting a new desing is natural for you, but to ensure you don’t end up regretting your tat in years’ time, it’s important to approach the process thoughtfully before you are absolutely sure why you want and what you want.
What you need to pay attention?
Don't rush the process of picking a tattoo design, as your tattoo design might look cool now, but you might be regreted ashamed of having it in the future.The key to selecting the right design is research. Remeber what the tattoo design represent, choose meaningful and fresh design such as,symbols, mantras, name or other designs which are meaningful to you. You need to consult with tattoo artist as well. Experienced tattoo artist are great for picking up a general idea and transforming it into a unique tattoo that means something to you and tell you about the position of your tattoo.
The design of the tattoo collates with specific body parts. Also, the size of the design will have a serious effect on the longevity of the tattoo.
If you get something too small, the chances for getting the tattoo smudged after a few years are high. Remember, your skin will not stay the same forever.
If you want your tattoo to be private, you should pick a spot that is normally covered in clothes.
Another thing to consider is that different parts of your body produce different levels of pain. Generally, parts covered in muscle or fat will hurt less than tattooing an area where there are lots of bones.
You can get a tattoo anytime you like, but there are optimal times for this procedure. The best time for getting a tattoo is during fall or winter when you have more clothes protecting the tattoo during the healing process.
Also, the sun is the sworn enemy of a freshly inked tattoo. Too much sunlight will harm your fresh tattoo by possibly causing irritations and early fading as well.
There are many skin allergies that can occur upon tattooing. No matter how minor it is, you need to consult a doctor and talk about whether getting a tattoo would be a good idea. You never know you, your skin will react to being drilled with multiple needles and having chemicals inserted into it.
The point is you need to take extra precautions before getting a tattoo.
https://www.dropbox.com/sh/7k2hqxuqkttentn/AACpU5g30ai3VtVb_gWXHhHxa?dl=0
comparing with hand-drawing, tattoo stencil printer accurately transfer a design from paper to your skin.
1. Two operation mode: mirror and copy. Machine will have a ready-to-use stencil available within one minute.
2. Deepness setting. Switch between “Deepness 1” and “Deepness 1” to adjust the device’s sensitivity to line thickness.
3. Easy-to-use. All functions comes with dedicated control buttons, you can know exactly how to trigger each process.
4. Portable. 1.17kg total weight, ideal option to bring on the road
5. Fast transfer printing speed, low heat, low noise and stable.
6. Durable. The machine has no heating elements, cylinders, or bulbs; you never have to worry about replacing short-term use parts.
7. The tattoo printer accepts print requests sent via Wi-Fi or Ethernet.
]]>
At your regular appointment, your hygienist will first clean your teeth and remove any plaque buildup. This process is called scaling. After your teeth are clean, your hygienist might take scans of them. Then, your dentist will inspect your teeth for any cavities and other problems. Lastly, they'll polish your teeth to get rid of any lasting plaque.
A tooth polisher can smooth the surface of your teeth, remove stains, get rid of plaque,make your teeth look shiny and clean,prevent gum disease and irritation etc.Polishing can get rid of stains from:Coffee, Wine, Tea, Smoking, Betel quid or areca nut chewing.
As we all know that, teeth polishing can make teeth smooth and gleam. But imporper operation may damage your enamel and cause tooth sensitivity or hurt your gums.
Tooth polishing helps keep plaque off your teeth. Research suggests that teeth polishing doesn’t stop you from getting gum disease, but people who have polishing done tend to have less bacteria.
It used to be standard for all teeth to be polished until research showed that doing so removed enamel. Then in the 1970s, an influential textbook, “Clinical Practice of the Dental Hygienist,” by Dr. Esther Wilkins, recommended “selective polishing” – meaning the hygienist should only shine stained parts of the teeth and not the whole set.
As to whether enamel will be worn down, Dr. Frantsve-Hawley, a registered dental hygienist who has a Ph.D. in biological and biomedical sciences, said twice-a-year polishing at the dentist’s office, even with the coarsest paste, is “not frequent enough to cause significant damage to the enamel.”
Dr. Lorentzen agreed, saying, “Polishing is not a significant risk.” By contrast, not utilizing a soft toothbrush or brushing too hard daily can damage the gentler structures of the teeth, like the cementum, the surface layer of the tooth root.
“Polishing is both cosmetic and healthy. While it certainly can significantly improve the look of your teeth, it also removes unwanted plaque and biofilm, to create healthy gums.”
— Dr. Linhart, Linhart Dentistry, New York
Rubber cup.
Your dental hygienist uses a slow drill with a rubber cup or brush. The cup is dipped in some dental polishing paste and then applied to your teeth. The paste is an abrasive that scrubs away any stains and plaque.
Air powder polishing.
With this, they'll use a slurry of water and baking soda with air and water pressure to polish your teeth. It’s sometimes used with an ultrasonic plaque remover.
Air polishing is used in between teeth and cracks where the rubber cup can’t reach and to remove plaque above your gum line.
Prophylactic Paste (Polishing Paste)
Prophylactic paste contains abrasives that vary in size, shape, and hardness.[5] Based on these variants, pastes are available in fine, medium, coarse and super-coarse grits.[1] There are also various flavours of prophylactic paste available. Some prophylactic pastes contain fluoride to aid in the remineralization of the enamel surface and others help reduce dentinal sensitivity.
Bristle brush
Bristle brushes are used in the prophylaxis angle with a polishing paste. The use of the brush should be confined to the crown to avoid injury to the gingiva and cementum.
Prophy angle
Currently, the most commonly used tool for tooth polishing is prophy angle. It integrates a rubber cup into a high torque gear, which can be plugged into a low speed handpiece and drive rubber cup to polish teeth.
Dental tape
Dental tape is used for polishing the proximal surfaces of teeth that are inaccessible to other polishing instruments. It is also used with polishing paste. Particular care should be taken to avoid injury to the gingiva. The area should be cleaned with warm water to remove all remnants of the paste.
Current evidence suggest that prophylactic polishing is only necessary when extrinsic stain is present on the tooth surface. This suggests that tooth polishing should be based on individual needs. If your teeth bother you, or if you’re thinking about trying a dental polishing home kit, make sure to talk to your dentist.
Enjoy!
LifeBasis share items with you for dalily routine!
Website: www.lifebasis.com
Contact: webmaster.com
Facebook: https://www.facebook.com/LifeBasis-114571757912143
Instargram: https://www.instagram.com/life_basis/
Youtube:https://www.youtube.com/channel/UCdpfzrpDa88XZKb22LtTLBg
]]>
1. "I recently purchased an inexpensive ultrasonic cleaner, and have just tested it on myself. I had a visible build-up of tartar on my lower, front incisors, as I have not been able to visit a dentist as much as I’d like over the last 3 years (due to moving to different countries).
Whilst I cannot argue against the point about the possibility of damaging enamel or gums if used incorrectly (and regular dental visits are certainly no substitute for DIY denistry) – I can say that I was impressed at how effective the tool was at removing the tartar build up on my teeth.
Although it took about 10 minutes to figure out the best angle – and it’s a little awkward doing it yourself, after I got the hang of it, I was able to remove all the visible tartar. It was even coming off in big flakes.
I won’t share the link to the cleaner I bought (I don’t want this to appear like spam – although I’d be happy to if you request) – but it was a non-branded tool and cost less than £35.
So – I’m sure there are risks if you don’t know what you’re doing, but in my experience – they can and do remove tartar (at least – mine did) "
2. " A trip to the dentist is beyond most peoples affordability nowadays. Waiting lists for NHS are months plus plus long and the cost of private dental care beyond the means of someone on an average British income.
As someone in need of so much work doing I dare not even go for a check up.
When one knows they will need treatment way beyond my means its a case of waiting for an emergency to arise.
That’s the reality for most people. So use a ultrasonic teeth cleaner at home is best choice"
Ultrasonic cleaning is operated by creating high-frequency waves in a liquid.The rapid motion of the water creates very small bubbles that hit the surface to be cleaned and knock any dirt .During an ultrasonic teeth cleaning, plaque and tartar is removed with an ultrasonic scaler which uses sonic vibrations to break apart harmful build-up. After the plaque and tartar is broken up, the ultrasonic scaler shoots water into the dental crevices to wash away debris.
1. Oral health is extremely important to overall health, teething cleaning is crucial to prevent cavities, gum disease, and oral cancer etc.
2. Trip to the dentist is beyond affordablility and waiting time are months plus long.
3. According to this study, 61% of people are afraid of going to the dentist. There is a significant amount of discomfort that is associated with the dentist’s office. Personally, one of my biggest fears about the dentist’s office is the sound that the metal scraper makes against my teeth when the dentist is scraping off the plaque.
This is an excruciatingly long and often painful process...quite literally akin to 60 minutes of nails on a chalkboard (even if it is set to a background track of dental office soft rock jams!).
3. Ultrasonic teeth cleaner is an inexpensive teeth cleaner which can help to clean teeth effectively at home. What are advantage of ultrasonic teeth cleaner ?
(1) Ultrasonic teeth cleaner feature a very small tip, which allows them to penetrate deeper into dental pockets than traditional manual scalers;
(2)The water sprayed by the ultrasonic scalers post-vibration helps to dislodge accumulated plaque and tartar;
(3) Ultrasonic scaling vibrations actually creates oxygen bubbles in deep dental pockets, which helps to kill off harmful bacteria growing there and ultimately prevent gum disease
To prevent plaque buildup and calculus deposits from occurring in the first place, having a good oral hygiene schedule at home is the first step in maintaining a healthy mouth.
Even after your dental visit, it is important to continue your brushing, flossing, and fluoride habits to continue protecting your teeth from bacteria and infeacting.
Enjoy!
-----------------------------------------------------------------------------------------------------
LifeBasis share items you need for daily routine!
]]>Ultrasonic cleaning is a type of cleaning process which uses cavitation induced by alternating compression and rarefaction cycles at ultrasonic frequencies. Cavitation is the phenomenon where tiny bubbles or voids are formed in a liquid due to the rapid decrease in pressure. These voids are instantaneously imploded by the rapid increase in pressure creating a shockwave Ultrasonic frequencies are sound waves vibrating at a range from 20kHz to 100 kHz.
An ultrasonic cleaner operates by creating high-frequency waves in a liquid.The items to be cleaned are placed in this liquid, where the rapid motion of the water creates very small bubbles that hit the surface to be cleaned and knock any dirt to the bottom of the liquid's container.
The basic mechanism used in an ultrasonic cleaner is a device that creates a high-frequency sound called a transducer. Ultrasonic ranges in frequency from about 20 to 400 kHz. This signal enters the liquid, which needs to be viscous enough for the waves to move through it quickly, and begins to generate very small bubbles. The higher the frequency of the sound, the smaller the bubbles will be. These bubbles move through the liquid and hit the surface of the items to be cleaned, causing the dirt to fall away.
When you connect your machine to a power source and switch it on, the generator and transducer immediately get to work. As the generator begins to convert the direct source of power into electrical energy for the transducer, the transducer starts to vibrate and pulse. It also begins to convert the electrical energy into ultrasonic energy.
As a result of the quick movement, the transducer creates high-frequency compression sound waves. This movement ultimately results in the formation of cavitation bubbles, and as this process occurs, the bubbles travel through the cleaning liquid and cleaning begins.
Most items can be washed by water only while some special stains and dirt require liquid cleaner in the water can be simple ammonia solutions or more complex solvents.This can prevent having to run a piece of jewelry through an ultrasonic cleaner repeatedly until the stains are slowly removed.
Some ultrasonic cleaners have very simple designs, an ultrasonic cleaner is comprised of three essential components: a tank, a generator, and a transducer. Other designs are more complex, providing trays that allow items to be secured in place before being lowered.
Tank: Ultrasonic cleaning machines are available in a variety of tank sizes. The size of your machine will depend on the size and quantity of items you will be cleaning.
Generator: The power generator converts electrical energy from the source into mechanical energy in the form of sound waves. These sound waves are comprised of millions of microscopic bubbles. Each bubble is filled with a vacuum effect called implosion. As the bubbles collapse on the item being cleaned, they implode, removing the debris from the object. This process is called cavitation.
Transducer: The transducer is perhaps the most critical component of an ultrasonic cleaning machine. Using electrical energy from the generator, it generates sounds at frequencies that the human ear cannot hear. This usually starts around 40kHz.
A transducer has two essential parts: the frequency plate and the transducer itself. For most cleaning machines, piezoelectric crystals are used as the active element. They are usually positioned at the bottom.
Industrial Cleaners: As the name suggests, these cleaners are high-grade and are for industrial level use. As such, these cleaning tanks are either larger or custom designed. Similarly, the generators are more robust, delivering more power, and the transducers are of a higher grade.
Lab size/Tabletop Cleaners: Lab size or tabletop cleaners are available in a variety of sizes. They take up less space than an industrial cleaner and are designed for all day operations. They usually offer more accessories to assist with the cleaning operation.
Small Systems: These systems are generally used in home or small business settings. They offer the functionality of larger systems, but with less capacity and fewer features.
Depending on the object to be cleaned, pick the suitable solution you need. Such as the frequency, tank size and the voltage standard.
The level of frequency determines the kind of cleaning that is created. At high frequency, small bubbles are produced, which offers a gentler and more detailed cleaning action. If you are looking to clean extensive dirt and contaminants, you should use lower frequencies. The lower the frequency, the bigger the bubbles, allowing the user to perform more intense and aggressive cleaning actions.
Below is comparison about different Ultrasonic Jewelry Cleaner at lifebasis.com for your reference.
Enjoy!
Website: www.lifebasis.com
Contact:webmaster@lifebasis.com
Facebook: https://www.facebook.com/LifeBasis-114571757912143
Instargram: https://www.instagram.com/life_basis/
]]>
How big tank do I need?
It looks like all you have to do is measure your biggest part and adjust your tank accordingly. In fact, a better way is to look at all your parts: if you're cleaning the same thing in each batch, or just dealing with widgets, the selection is easy. However, if you have a wide range of part sizes and geometries, check the combinations. Only one or two large parts, there are many smaller parts? It may not make sense to buy a larger system for just a few parts. Tank pricing rises rapidly with size.
Do I really need heat?
Unless you always fill your water tank with hot water, use hot water and a chemical cleaner for each cooling, and yes, you need to heat up. The ultrasonic energy preferably flows through the water at a temperature of 140-170 ° F. In addition, hot water helps dissolve much of the soil, further enhancing part cleaning.
Do I really need a parts basket?
Maybe not. Remember, you do not want parts to rest on the bottom of the tank. When the sensor is mounted on the bottom, this impedes the transfer of water through the water. Some people with larger parts simply make a simple stand or washer to keep the bottom of the part and it works fine.
How can I put this stuff in?
It depends on the part to be removed and the soil. The most common application will be served by a chemical we provide here. Look at the chemicals page. If you do not find what you need, feel free to call us. We have more than 10 years of experience in ultrasonic cleaning. If we can not help you, we will be happy to contact you.
I found something cheaper elsewhere, why should I buy LifeBasis ultrasonic cleaner?
The best reason is that you really got what you paid for, which is just like the rest of the internet. Here is what we are offering for your money: